To use Chaosnet, you need to take a few steps.

If you are never ever going to connect to the Global Chaosnet (which would be a shame), pick a 16-bit number where both octets are non-zero, and translate it to octal, which is the base used everywhere.

If you might at one point connect to the Global Chaosnet, e.g. to have more communication opportunities, you should contact Björn (bjorn@victor.se) to get an address which work with the rest of the net. Give a brief description of what system or systems you want to connect, and we'll work out the details.

First emulated systems are described, then modern alternatives.

If you are running ITS using the PDP-10 emulator klh10, things are reasonably easy.

The configuration is done in two parts: the klh10 emulator, and ITS itself.

To use Ethernet as the link layer, use

devdef chaos ub3 ch11 addr=764140 br=6 vec=270 myaddr=XXXX ifmeth=pcap

where XXXX is your Chaosnet address. See “Picking a Chaosnet address”.

To use UDP as the link layer, instead use

devdef chaos ub3 ch11 addr=764140 br=6 vec=270 myaddr=XXXX chip=3040/router.chaosnet.net

Find your configuration in SYSTEM;CONFIG > at the appropriate IFE MCOND, such as IFE MCOND DB if you are running a vanilla DB system. Make sure to use the following, where XXXX is your Chaosnet address (same as above).

DEFOPT CHAOSP==1	;Has CHAOS net
DEFOPT MYCHAD==XXXX	;CHAOS net address
DEFOPT NINDX==50.	;Number of indices
DEFOPT CH11P==1		;CHAOS net goes through Unibus

You might also want to rename your system - see instructions here.

You can of course add hosts to SYSHST;H3TEXT > and run H3MAKE, but you can also use DNS in ITS. It's a bit of a mess right now, I'll document it later.

LambdaDelta uses the Ethernet link layer. The configuration is done entirely in the lisp system.

Edit SYS:SITE;HOSTS TEXT to change the CHAOS address of your host. ¹⁾

Use (UPDATE-SITE-CONFIGURATION-INFO) to recompile and load the host table.

You need to use SYS:SITE;HOSTS TEXT for your local address, but if you don't want to add other hosts manually, you can use DNS.

Edit SYS:SITE;SITE LISP to set the appropriate site options. Suggestions:

Use (UPDATE-SITE-CONFIGURATION-INFO) to recompile and load the site definition.

usim uses unix sockets for link layer. Depending on your version, you might need to edit the code to change your address, but perhaps you can use a command line option. You also need to run chaosd.

See “Network configuration” for LambdaDelta.

The Chaosnet bridge program, cbridge, can use any link layer, depending on your needs (see above).

See https://github.com/bictorv/chaosnet-bridge/blob/master/CONFIGURATION.md. And I should add documentation.

See https://github.com/bictorv/chaosnet-bridge/blob/master/CONFIGURATION.md, the dns option. If you use LambdaDelta, you can turn on the forwarder option and add the Chaosnet address of cbridge to :DOMAIN-CHAOS-SERVERS (see above) as an octal number.

See https://github.com/bictorv/chaosnet-bridge/blob/master/NCP.md. No really, I should add stuff here. But see the example programs